What Ink Jet cartridges can I transform?

How to seal a cartridge in an effective way?

How to centrifuge an ink jet cartridge?

What Ink Jet cartridges can I transform?

HP 1823D – Can be changed into the machine in HP 6625A;
HP 51645D - Can be changed into the machine in HP C6615D;
HP C8728A – It allows to use in the printer of HP C6657A;
HP C8727A - It allows to use in the printer of HP C6656A;
Canon BX-3 - It allows to use in the printer of Canon BC-01 e BC-02;
Canon BX-20 - It allows to use in the printer of Canon BC-20;
Lex 12A1980 - Can be changed changing the cover into Lex 15M0120 and Lex 17G0060;
Lex 12A1970 - Can be changed into Lex 17G 0050, but the cover of ink as to be changed too;
Lex 12A1975 - Can be used as Lex 12A1970;
Lex 15M0125 - Can be used as Lex 15M0120;
Lex 12A1985 - Can be used as Lex 12A1980;
Lex 10N0217 e Lex 10N0016 – They are equal;
Lex 10N0026 e Lex 10N0227 – They are equal;
Lex 83 e Lex 88 – They are equal.

Note: some of those inks should be converted in others through the utilization of an own machine for the effect as shows the following picture.

How to seal a cartridge in an effective way?

Sealing
Cleanness of the head
Always clean in a parallel direction to rubbers, as they are demonstrate the following pictures. The cleanness for besides being parallel has to be made to the side of the circuit from the other side of the cartridge to prevent that if it tears the circuit.

Note: The ribbon is always in the direction of rubbers to the exception of Inks HP 15D and 45.

Ribbon of sealing to use:
Fine (1cm) – Inks HP 26 / 29 / 14 e 28;
Medium (1,5cm) – Inks HP 49A / 51625A / Lexmark / Samsung M40 / Phillips;
wide (2cm) – cartridge HP 15D e 45A.
Ãpply the ribbon:
Give heat into the ribbon and with the finger places it ribbon in the head, as it demonstrates the following image.

Note: The sealing ribbon never must exceed the circuit, otherwise exists the risk to pull out the circuit when take off the ribbon to place the cartridge in the printer.

How to centrifuge an ink jet cartridge?

The process of centrifugalization of the cartridges is so very simple, it have to put the cartridges inside of the centrifuge with the head on the direction of clock pointers and with the circuits out, leave centrifuge untill the liquid no longer came out. In the case of HP cartridges they can place five cartridges in each line and four layers, the Lexmar places seven cartridges in each line and can have six layers, cartridges CANON can place eight in each line and do the layers that if to want. In HP 6657 / 6656 / 8728 / 8727 / 6658 cartridges, the label is placed out and the head for the center of centrifuge.

Note: If you don´t want to crack the cartridges CANON BC-01 / BX-3 / BC-02 and BX-2 you have to put a rubberband surronding the cartridge, such as is demonstrate the image above. Only the cartridges with sponge can be centrifuged to the exception of ink CANON BX-3.